Welch Allyn Acuity Directions For Use Manual page 144

140 Chapter 9 Status icons
Table 8. Icons and messages that represent patient and monitor status
Patient/monitor
status icon
Alarm Tone Suspended
with No Violation
color reflects current
status of monitor
Wireless
Unconfirmed Patient ID
Unconfirmed Room
Number
Some Alarm Limits Off
Icon display Icon location on map
priority
Beneath alerts Locations representing
and alarms monitors with audible
alarm tones suspended
when no alarm or alert
violation has occurred.
When the View Wireless
button is pressed in the
lower left corner of the
Acuity Central Station
screen, this icon appears
in map locations where
wireless monitors are
actively communicating
with Acuity System.
Low-level alert Locations representing
monitors with
unconfirmed patient IDs.
Low-level alert Wireless monitor map
areas, representing
patients with unassigned
or unconfirmed room
numbers.
Low-level alert Locations representing
monitors with alarming
for some vital signs set
to off.
Welch Allyn Acuity Central Monitoring System
Messages in Recommended action
hallway message
panels and at top
of Acuity Central
Station screen
None At the patient monitor,
press the Silence/Reset
key when ready.
Or
At the central station,
click Resume in the
patient's Virtual Monitor
when ready.
None
None In the patient's Virtual
Monitor, click Setup,
Patient ID.
Confirm or enter ID
information
None In the patient's Virtual
Monitor, click Setup,
Patient ID.
Confirm or enter a room
number.
None In the patient's Virtual
Monitor, click Setup,
Alarms.
Set at least one upper and
lower "limits-pair" per
active vital sign.