Welch Allyn Acuity Directions For Use Manual page 110

106 Chapter 6 Review or print patient data
To locate and display alarm and event information
1. Along the top of the waveforms, click an event marker.
•
•
•
The blue cursor bar identifies event types along each waveform.
2. Jump to the next or previous alarm or arrhythmia event.
•
•
3. Jump to the next or previous event of the same type that is currently displayed.
•
•
The blue cursor bar identifies the event.
If you do not see some of these buttons in the window, click
left corner of the Acuity System screen to change the screen view.
▼ event markers show Relearn, Learning Done or Snapshot Print events.
♥
event markers show that an arrhythmia alarm was recorded.
♥
event markers show that an arrhythmia event was detected, but no alarm
occurred because alarming for this arrhythmia type was turned off in the
Arrhythmia Alarms Setup window.
Click or to jump to the next or previous alarm.
Click or to jump to the next or previous arrhythmia event.
Click or to jump to the next or previous alarm of the same type.
Click or to jump to the next or previous arrhythmia event of the same
type.
Welch Allyn Acuity Central Monitoring System
Cursor bar
or in the upper