Welch Allyn Acuity Directions For Use Manual page 33

Directions for use
3. Attach the cables to the monitor last, to optimize waveform interpretation during the
initial Acuity System learning phase.
To respond to the CONFIRM PATIENT? prompt
1. If you see the CONFIRM PATIENT? prompt, respond as follows:
•
•
2. If you see the MONITOR SETTINGS? prompt, click one of these buttons:
.
CLR TREND
• Clears current trend
values.
• Keeps current alarm
limits and displays.
WARNING Carefully verify the patient's ID and name before you respond to the
CONFIRM PATIENT? prompt. If you assign another patient's ID number, the
Acuity System could combine patients' Full Disclosure review information.
If the indicated patient is the correct patient, press YES.
The patient is confirmed at the Acuity Central Station.
The Acuity System sends unit default alarm limits and unit settings to the patient
monitor.
If the indicated patient is incorrect, press NO.
The MONITOR SETTINGS? prompt appears.
PRESETS
• Keeps current trend
values.
• Uses Acuity System
Presets-- default alarm
limits and displays.
Chapter 3 Admit and begin monitoring
BOTH
• Clears current trend • Keeps current trend
values.
• Keeps current alarm
• Uses Acuity System
Presets-- default alarm
limits and displays.
29
NEITHER
values.
limits and displays.