Welch Allyn Acuity Directions For Use Manual page 194

190 Chapter 11 Specifications
Table 32. Virtual Monitor
Features
Heart rate (HR)
Table 33. Waveform Window
Features
Waveform Window auto
open
Number of waveforms
displayed simultaneously
Display priority of
waveforms
Number of vital sign
numerics displayed
Display priority of numerics 1. HR/PR
Heart rate (HR)
Setup windows
Table 34. Setup window
Features
Display priority of vital signs
Alarm limits
Presets values
Stat Set values
Auto Set values
Customizable default
Factory default
In waveforms views:
1. Upon monitor connection to Acuity System if empty window
2. Upon alarm if open space is available OR replaces a non-alarming Waveform Window
Up to two
1. ECG 3. P2 5. P4
2. P1 4. P3 6. CO
Up to four. If four or more monitored at once, the third and fourth alternate in the same
zone; others appear if they alarm
4. P2
2. SpO 5. P3
2
3. P1 6. P4
For patients being monitored for arrhythmias, the HR value is derived from the arrhythmia
library instead of from the patient monitor.
Alarms
—
Customizable default
Micropaq monitor:
HR: 50 to 120 bpm
SpO : 90% to 100%
2
Welch Allyn Acuity Central Monitoring System
Factory default
For patients being monitored for arrhythmias,
the HR value is derived from the arrhythmia
library instead of from the patient monitor.
7. RESP 9. NIBP
8. SpO
2 2
7. CO 10. NIBP
2
8. RR/BR 11. Temperature
9. IPI
Factory default
Up to three vital signs, in this order of priority:
1. Vital signs in alarm
2. Active vital signs (in the order listed in window)
Presets values
For all monitors except the Micropaq monitor: Presets
are the factory default alarm limits of the patient
monitor, based on patient mode. For further information,
see monitor directions for use.
Acuity Systems execute the Propaq Encore monitor
STAT SET function. For further information, see Propaq
Encore directions for use.
Acuity Systems execute the Propaq Encore monitor
STAT SET function. For further information, see Propaq
Encore directions for use.