Welch Allyn Acuity Directions For Use Manual page 114

110 Chapter 6 Review or print patient data
Adjust the waveform display
To display waveform(s) that correspond to an event
1. In the events list section, click an event.
The corresponding waveform(s) appear in the waveform pane, and the blue cursor bar
indicates the event.
2. Scroll the waveform.
Click
Click
3. Click
Click
type that is currently indicated by the cursor bar.
To select and adjust the waveform(s)
1. Check boxes under Waves to display waveforms from different ECG lead sources.
Up to seven waveforms can fit in the window.
2. If you see less than seven waveforms, and you prefer more, click
left corner of the Acuity System screen to change to the full-screen view.
3. Click Scales, and then make a selection.
Beat labels: Normal (•) and ventricular (v)
or to scroll forward or backward.
or to page forward or backward.
or to jump to the next or previous arrhythmia event.
or to jump to the next or previous arrhythmia event of the same
Welch Allyn Acuity Central Monitoring System
Arrhythmia event marker
Event in events list section
in the upper