Welch Allyn Acuity Directions For Use Manual page 198

194 Chapter 11 Specifications
Table 36. Setup window
Features
Presets values
Clicking the ST RELEARN
button
Table 37. Setup window
Features
Vital signs that initiate central alarm print
Central auto print time interval
Vital signs that initiate Central OxyCRG alarm print
Priority of vital signs alarming simultaneously for alarm
prints
Table 38. Setup window
Features
Number of vital signs checked at once
Priority order of displayed vital sign boxes
ST Analysis
—
Customizable default
Alarm limits: 1.0 mm
Alarm level: Low
Measurement Offset: Auto
Print on Alarm: Off
Printouts
—
Customizable default Factory default
HR
Off
Off
Waveform-Window
—
Customizable
default
Up to two, but only one
ECG at once
Welch Allyn Acuity Central Monitoring System
Factory default
System relearns a patient's normal ECG rhythm and
uses the relearned rhythm as a guideline to analyze
deviation of the ECG ST-segment offset.
Establishes a new ST reference beat without
changing the normal ECG rhythm used for arrhythmia
analysis.
In ST Analysis Setup window: The waveform slice
displays NO VALID BEATS, and the Acuity System
can take up to 30 seconds to update the waveform.
Relearn and Learning Done event markers (▼)
appear in most review windows and some printouts.
Order listed in window
Factory default
1. ECG 1 4. P3
2. P1 5. P4
3. P2 6. CO
7. RESP
8. SpO
2
9. NIBP
2