Welch Allyn Acuity Directions For Use Manual page 113

Directions for use
Adjust the content of both list sections
Numbers of arrhythmia events that occurred in
To adjust the time period covered in both list sections
1. Click a number under the time line to adjust the line's scope, in hours.
2. On the time line, click an area in which you are interested. Events are red.
The blue box moves. The box indicates the time span covered in both sections.
3. Under Time Span, click to specify the number of hours spanned in both list sections.
In the event counts section, the number of events beside each box is updated to
reflect the current time span.
In the events list section, the listings change.
To specify the content of the events list
1. In the event counts section, check any of these things to list them in the events list
section:
a. Check arrhythmia-types.
b. Check these boxes to further refine the listings:
•
•
•
Event counts section
the selected time span are listed here.
Lethal and High Arr Alarms: List only lethal events and events that were set to
high priority in the Arrhythmia Alarms Setup window.
All Arr Alarms: List all events that alarmed.
All Arr Events: List all events that occurred, whether or not they were set to
alarm.
Chapter 6 Review or print patient data
Events list section
All events checked in the event counts section (left)
are listed and described here.
109