Welch Allyn Acuity Directions For Use Manual page 143

Directions for use
Patient/monitor status icons and recommended action
This table illustrates these things about patient/monitor status icons:
• Display priority
• Location on the central station map
• Messages at the top of the Acuity Central Station screen
• Messages in message panels (when present)
• Recommended action
Table 8. Icons and messages that represent patient and monitor status
Patient/monitor
status icon
Port Icon
Monitor Connecting
Monitor Disconnecting
Patient Intentionally
Disconnected
Patient Monitoring OK
Auto NIBP-Only
Monitoring
Icon display Icon location on map
priority
Locations representing
unused ports available
for monitoring Acuity
System patients.
Locations representing
monitors establishing
communication with
Acuity System.
Locations representing
monitors disconnecting
from Acuity System.
Locations representing
monitors from which
patients have been
intentionally
disconnected.
This icon also appears
during Manual NIBP-Only
monitoring and spot
SpO2 monitoring, but
does not affect alarming
at Acuity.
Beneath alerts Locations representing
and alarms patients/monitors that
are not in an alarm or
alert state.
Beneath alerts Locations representing
and alarms monitors that are only
monitoring NIBP,
automatically.
Chapter 9 Status icons
Messages in Recommended action
hallway message
panels and at top
of Acuity Central
Station screen
None When you are ready, begin
monitoring from this
location.
None Wait until communication
is established before you
open the Virtual Monitor
or Waveform Window.
None If you have pressed the
NET OFF key, unplug
monitor from Acuity
System within 15 seconds
or Acuity System
reconnects.
None If communication between
the patient and Acuity
System is reestablished,
the CONFIRM PATIENT?
prompt appears.
Click YES to reconnect the
original patient to Acuity
System.
None
None
139