info@Testo-Direct.com
6 Using the product
>
[
]
→
Device settings
type
→
[OK].
Show or hide measurement types:
1. Select measurement type:
2. Enable / disable measurement type:
(disabled)
3. Save selection: [Finished].
6.1.2.2.
Printer
The headers (lines 1-3) and the footers for the printout can be set.
The printer that is used can be activated.
Calling up the function:
>
[
]
→
Instrument Settings
Activating the printer:
The printer 0554 0543 can only be selected after the
Bluetooth
Bluetooth
1.
Select Printer
2. Select the printer: [▲],
-
The printer is activated and the menu
Configuring the print text:
1.
Print text
→
2. Select function:
> Enter values for
> Print out system data and/or customer data:
3. Save the entry: select [Finished].
see Bluetooth
®
, page 40
6.1.2.3.
Bluetooth
®
This menu is only available if the instrument is equipped with
Bluetooth. The Bluetooth module can be switched on / off.The relay
can now be tested.
Calling up the function:
>
[
]
→
Instrument Settings
Making settings:
> Set parameter → [OK].
40
www.
→
[OK]
→
Choose measurement
[▲], [▼]
[
]
(enabled),
→
[OK]
→
Printer
®
-interface has been activated, see
®
, page 40.
→ [OK].
[▼]
→ [OK].
Printer
[OK].
[▲], [▼]
→ [Edit].
Line
1,
Line
2,
Line 3
and the
→
[OK]
→
Bluetooth
Testo-Direct
[
]
→
[OK]
is opened.
Footnote
[
]
→ [Edit].
1.888.610.7664
.com