Co Undiluted - TESTO 320 Instruction Manual

info@Testo-Direct.com
> [ ] → Measurement options
> Select the fuel → [OK].
Carrying out the measurement:
1. Start the measurement series:
Wait for the balancing time, until O
20%.
2. [Next].
- The qA measured values (O
- The measurement stops automatically.
- The measured values are displayed and saved automatically in
a record.
3. End measurement:
or
End measurement and call up draught measurement function:
[Draught - Measuring].
Options:
> [Options] → Clipboard: data is saved to the clipboard.
[Options]
> →
is deleted.
> [Options] → Save: the measured values are saved in a record.
> [Options] → Address/Location: the Address/Location folder is
opened.
4.
6.2.7.

CO undiluted

Call up function:
✓ A multi-hole probe (0554 5762) should be connected.
> [ ] → Measurement options
[OK].
Carrying out the measurement:
1. Start measurement:
- The measured value is displayed.
2. End measurement:
Options:
[Options] → Clipboard: data is saved to the clipboard.
>
> [Options] →
is deleted.
www.
→ [OK] →
[ ]
shows a value below
2
, AT, VT) are determined (30 s).
2
[Close]
Delete clipboard: any data saved to the clipboard
→ [OK] →
[ ]
[ ]
Delete clipboard: any data saved to the clipboard
Testo-Direct
6 Using the product
BImSchV → [OK].
CO undiluted →
51
1.888.610.7664
.com