Switching Off; Address/Location - TESTO 320 Instruction Manual

info@Testo-Direct.com
5 First steps
Errors that have occurred but have not yet been rectified are
indicated by a warning symbol (
Error messages that have not yet been cancelled can be displayed
Error diagnosis
in the
5.2.9.

Switching off

Unsaved measured values are lost if the flue gas analyser
is switched off.
> Press [ ].
- Depending on the instrument status, the pump starts and the
sensors are rinsed until the switch-off thresholds (O
other measurement parameters < 50 ppm) are reached. Rinsing
lasts no more than 3 minutes.
- The measuring instrument switches off.
5.3.

Address/Location

All measuring values can be saved under the currently active
location. Measuring values that have not been saved are lost when
the measuring instrument is switched off!
Addresses and locations can be created, edited, copied and
enabled. Addresses and locations (incl. protocols) can be deleted.
Call up function:
> [ ] → Address/Location
There are various options for opening address.
1. Edit search setting: [Edit].
2. Select search setting: [▲],
Possible settings:
• Show all: All address/location are displayed.
• Search: A search text only brings up address/location that
contain characteristics of the search text.
Filter: Individual letters or numbers can be selected. All data
•
beginning with the relevant letter/number is displayed.
The initial letter is the determining factor for the
function, and this can only be selected individually. The
search function can also be used to find a series of
several letters within the address!
3. Carry out search according to search setting:
32
www.
) in the header.
menu, see Instrument diagnosis, page 35.
→ [OK].
[▼] → [OK].
Testo-Direct
> 20 %,
2
filter
[Search]
1.888.610.7664
.com