Specifications; Use; Technical Data; Examinations - TESTO 320 Instruction Manual

info@Testo-Direct.com
3

Specifications

3.1.

Use

The flue gas analyzer is a handheld measuring device for the
professional flue gas analysis of combustion plants:
• Small combustion plants (burning oil, gas, wood, coal)
The solid fuel measurement adapter (0600 9765) is
required for measurements on solid fuel systems. The
adapter protects the measuring instrument from harmful
substances (dust, organic compounds, etc.).
• Low-temperature and condensing boilers
• Gas water heaters
These systems can be adjusted using the flue gas analyzer and
checked for compliance with the applicable limit values.
The following tasks can also be carried out with the flue gas
analyzer:
• Regulating the O2, CO and CO2 values in combustion plants
for the purpose of ensuring optimal operation.
• Draught measurement.
• Measuring and regulating the gas flow pressure in gas water
heaters.
• Measuring and optimising the flow and return temperatures of
heating systems.
• Ambient CO measurement (only possible with additional
ambient CO probe 0632 3331).
• Ambient CO measurement (only possible with additional
ambient CO probe 0632 1240).
• Detection of CH4 (methane) and C3H8 (propane) (only possible
with additional gas leak probe 0632 3370).
The Bluetooth ® option may only be operated in countries in which it
is type approved.
3.2.

Technical data

3.2.1.

Examinations

As declared in the certificate of conformity, this product complies
with Directive 2014/30/EC.
This product is TÜV-tested in compliance with 1. BImSchV. The
sensors 0393 0105 (CO, H2-compensated), 0393 0003 (O2),
www.
Testo-Direct
3 Specifications
9
1.888.610.7664
.com