info@Testo-Direct.com
The condensate outlet must be completely closed
(marking), otherwise measuring errors could be caused by
infiltrated air.
8
Tips and assistance
8.1.
Questions and answers
Question
Rechargeable battery low
Measuring instrument
switches off automatically
or cannot be switched on
Error message: Cell
protection enabled
Error message: Printing
not possible
8.2.
Accessories and spare parts
Printer
Description
Infrared high-speed printer
www.
8 Tips and assistance
Possible causes/solution
> Switch to mains operation.
Batteries/rechargeable batteries
empty.
> Charge rechargeable battery or
switch to mains operation.
The shutdown limit of the CO sensor
was exceeded.
> Remove the probe from the stack.
•
With printer 0554 0543: Bluetooth
interface not enabled.
•
Wrong printer enabled.
•
Printer switched off.
•
Printer outside wireless
transmission range.
> Enable Bluetooth interface, see
, page 40.
Bluetooth
®
> Enable printer to be used.
> Switch on printer.
> Move printer into wireless
transmission range.
Testo-Direct
Article no.
0554 0549
69
1.888.610.7664
.com