Table of Contents
Advertisement
The Logix Designer application performs configuration data checks as specified
by the limits that are shown in the data tables. The data checks verify that the
entry is within range for the device, however, it does not verify that it is
reasonable for the application. You must be sure that the entry is reasonable for
the specific application. If you enter an out-of range parameter in a Configuration
tab, a message box reports the error and the appropriate limits.
See
Chapter 6
for information on the limits that are specified by the data tables.
WARNING: Data limit checks do not configm values are appropriate for
the application.
Rockwell Automation Publication 1407-UM002B-EN-P - February 2019
CGCM-DLR Unit Configuration
Chapter 4
89
Advertisement
Table of Contents
