Table of Contents
Advertisement
In this example, the address of the controller Ethernet communication module is
192.168.1.111, and the CGCM-DLR address is 192.168.1.114.
The Logix Designer application must be offline when you create a
IMPORTANT
CGCM-DLR module.
1. Open Logix Designer application.
2. From the File menu, click New.
3. Enter the controller information, and then click OK.
Rockwell Automation Publication 1407-UM002B-EN-P - February 2019
CGCM-DLR Unit Configuration
Chapter 4
77
Advertisement
Table of Contents
