Protocol-Dependent Functions - Siemens SIPROTEC 4 Manual

D.6

Protocol-dependent Functions

Protocoll →
Function ↓
Operational Measured Values
Metered Values
Fault Recording
Remote Protection Setting
User-defined Indications and
Switching Objects
Time Synchronization
Messages with Time Stamp
Commissioning Aids
Measured Value Indication
Blocking
Creating Test Messages
Physical Mode
Transmission Mode
Baud Rate
Typ
SIPROTEC 4, 7RW80, Manual
C53000-G1140-C233-4, Edition 07.2018
IEC 60870-5-103 IEC 61850 Ethernet
(EN 100)
Yes Yes
Yes Yes
Yes Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Asynchronous Synchronous
cyclically/ event cyclically/ event
1 200 to 115 000 up to 100 MBaud
– RS232 Ethernet TP
– RS485
– optical fiber
Default Settings and Protocol-dependent Functions
D.6 Protocol-dependent Functions
Profibus DP DNP3.0
Modbus ASCII/RTU
Yes Yes
Yes Yes
No No
No No
Yes Yes
Yes Yes
Yes Yes
No No
No No
Asynchronous Asynchronous
cyclically
cyclically/ event
cyclically
up to 1,5 MBaud 2400 to 19200
– RS485 – RS485
– optical fiber – optical fiber
(double ring)
(DNP)
(Modbus)
213