Table of Contents
Advertisement
4.12
Dimensions
Panel Flush and Cubicle Mounting (Housing Size 1/6)
4.12.1
[abmess-sechstel-gehaeuse-7sx80-060606, 1, en_US]
Figure 4-2
Note:
A set of mounting brackets (consisting of upper and lower mounting rail) (order no. C73165-A63-
D200-1) is required for cubicle mounting. When using the Ethernet interface, it may be necessary
to rework the lower mounting rail.
Provide for sufficient space at the device bottom side or below the device to accommodate the
cables of the communication modules.
SIPROTEC 4, 7RW80, Manual
C53000-G1140-C233-4, Edition 07.2018
Dimensional drawing of a 7RW80 for panel flush or cubicle mounting (housing size
Technical Data
4.12 Dimensions
1
/
)
6
189
Advertisement
Table of Contents
