Table of Contents
Advertisement
Default Settings and Protocol-dependent Functions
D.5 Default Display
D.5
Default Display
The start page of the default display, which will open after device startup, can be selected via parameter 640
Start image DD.
6–line Display
[display-alle-20100517, 1, en_US]
Figure D-1
Depending on the V- connection different default dispalys are visible
Setting Parameter 213 VT Connect. 3ph
Van, Vbn, Vcn
Vab, Vbc, VGnd
Vab, Vbc, VSyn
Vab, Vbc
Vph-g, VSyn
Vab, Vbc, Vx
Spontaneous Fault Display
After a fault has occurred, the most important fault data are automatically displayed after general device
pickup in the order shown in the picture below.
[dw_display-spontanmeldungen, 1, en_US]
Figure D-2
212
Default display of 7RW80
Representation of spontaneous messages on the device display
Visible Default Displays
1 and 2
1 and 2
1, 2 and 3
1 and 2
4 and 3
1 and 2
SIPROTEC 4, 7RW80, Manual
C53000-G1140-C233-4, Edition 07.2018
Advertisement
Table of Contents
