Table of Contents
Advertisement
[einschub-mit-stuetz-20100716, 1, --_--]
Figure 3-8
Fix the front cover to the housing with the two medium screws at the top and bottom of the front cover. The
two covers can be inserted again either now or after the reinstallation of the device. Now install the device in
accordance with the Sections Panel Flush Mounting, Panel Surface Mounting or Cubicle Mounting.
NOTE
i
i
Insert the voltage terminal blocks again and lock them in place!
Installation
3.1.3
3.1.3.1
General
The 7RW80 relay has a housing size 1/6. The housing has 2 covers and 4 fixing holes each at the top and
bottom (see
Figure 3-9
SIPROTEC 4, 7RW80, Manual
C53000-G1140-C233-4, Edition 07.2018
Reassembly of Device
and
Figure
3-10).
Mounting and Commissioning
3.1 Mounting and Connections
135
Advertisement
Table of Contents
