Installation; General - Siemens SIPROTEC 4 Manual

[einschub-mit-stuetz-20100716, 1, --_--]
Figure 3-10
Fix the front cover to the housing with the two medium screws at the top and bottom of the front cover. The
two covers can be inserted again either now or after the reinstallation of the device. Now install the device in
accordance with the Sections Panel Flush Mounting, Panel Surface Mounting or Cubicle Mounting.
NOTE
i
i
Insert the current and voltage terminal blocks again and lock them in place!

Installation

3.1.3
3.1.3.1

General

The 7SJ80 relay has a housing size 1/6. The housing has 2 covers and 4 fixing holes each at the top and
bottom (see Figure 3-11
SIPROTEC 4, 7SJ80, Manual
E50417-G1140-C343-A8, Edition 12.2017
Reassembly of Device
and Figure 3-12).
Mounting and Commissioning
3.1 Mounting and Connections
323