Mounting
5.1
Notes on installation
Note
Keeping to the relevant installation guidelines
During installation and operation, keep to the installation instructions and safety-related
notices as described here and in the system manual "Industrial Communication SIMATIC
NET Industrial Ethernet Network Manual" (entry ID: 27069465
(http://support.automation.siemens.com/WW/view/en/27069465)).
Provide suitable shade to protect the device against direct sunlight. This avoids unwanted
warming of the device and prevents premature aging of the device and cabling.
Note
The requirements of EN61000-4-5, surge test on power supply lines are met only when a
Blitzductor BVT AVD 24V type no. 918 422 is used.
Manufacturer:
DEHN+SÖHNE GmbH+Co. KG Hans Dehn Str.1 Postfach 1640 D-92306 Neumarkt,
Germany
5.2
Types of installation
Types of installation
The SCALANCE S can be installed in various ways:
● Installation on a 35 mm DIN rail
● Installation on a SIMATIC S7-300 standard rail
● Wall mounting
SCALANCE S
Commissioning and Hardware Installation Manual, 05/2016, C79000-G8976-C266-06
CAUTION
5
31