Table 4-2. Configuration Modes - SMC Networks 100BASE-TX Management Manual

To enter the Global Configuration mode, enter the command configure in Privileged
Exec mode. The system prompt will change to "Console(config)#" which gives you
access privilege to all Global Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the following
commands. Use the exit or end command to return to the Privileged Exec mode.
Mode Command
Line line {console | vty}
Access access-list ip standard
Control List access-list ip extended
access-list mac
Interface interface {ethernet port | port-channel id| vlan id} Console(config-if)#
VLAN vlan database
For example, you can use the following commands to enter interface configuration
mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#

Table 4-2. Configuration Modes

Entering Commands
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-mac-acl)
Console(config-vlan)
4
Page
4-10
4-85
4-104
4-145
4-7