Rate-Limit Granularity; Show Rate-Limit - SMC Networks 100BASE-TX Management Manual

4
Command Line Interface
Example
Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input level 20
Console(config-if)#

rate-limit granularity

Use this command to define the rate limit granularity for the Fast Ethernet ports, and
the Gigabit Ethernet ports. Use the no form of this command to restore the default
setting.
Syntax
rate-limit {fastethernet | gigabitethernet} granularity [granularity]
no rate-limit {fastethernet | gigabitethernet} granularity
• fastethernet – Fast Ethernet granularity
• gigabitethernet – Gigabit Ethernet granularity
• granularity – Sets rate limit granularity for the system. For Fast Ethernet,
choose 512 Kbps, 1 Mbps, or 3.3 Mbps. For Gigabit Ethernet, only one
granularity option is supported, 33.3 Mbps
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Global Configuration (Ethernet, Port Channel)
Command Usage
Actual rate limit = Rate limit level * Granularity
Example
The following sets Fast Ethernet granularity to 1 Mbps, and Gigabit Ethernet
granularity to 33.3 Mbps.
Console(config)#rate-limit fastethernet granularity 1000
Console(config)#rate-limit gigabitethernet granularity 33300
Console(config)#

show rate-limit

Use this command to display the rate limit granularity.
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Privileged Exec
4-118