Associating Community Vlans; Figure 3-68. Configuring Private Vlans - SMC Networks 100BASE-TX Management Manual

3
Configuring the Switch
Web – Click VLAN, Private VLAN, Configuration. Enter the VLAN ID number, select
Primary, Isolated or Community type, then click Add. To remove a private VLAN from
the switch, highlight an entry in the Current list box and then click Remove. Note that
all member ports must be removed from the VLAN before it can be deleted.
CLI – This example configures VLAN 5 as a primary VLAN, and VLAN 6 and 7 as
community VLANs.
Console(config)#vlan database
Console(config-vlan)#private-vlan 5 primary
Console(config-vlan)#private-vlan 6 community
Console(config-vlan)#private-vlan 7 community
Console(config-vlan)#

Associating Community VLANs

Each community VLAN must be associated with a primary VLAN.
Command Attributes
• Primary VLAN ID – ID of primary VLAN (1-4094, no leading zeroes).
• Association – Community VLANs associated with the selected primary VLAN.
• Non-Association – Community VLANs not associated with the selected primary
VLAN.
3-116

Figure 3-68. Configuring Private VLANs

4-145
4-155