SMC Networks 100BASE-TX Management Manual page 42

3
Configuring the Switch
Menu
Input Trunk Configuration
Output Port Configuration
Output Trunk Configuration Sets the output rate limit for each trunk
Port Statistics
Address Table
Static Addresses
Dynamic Addresses
Address Aging
Spanning Tree
STA
Information
Configuration
Port Information
Trunk Information
Port Configuration
Trunk Configuration
VLAN
802.1Q VLAN
GVRP Status
Basic Information
Current Table
Static List
Static Table
Static Membership by Port Configures membership type for interfaces, including tagged,
Port Configuration
Trunk Configuration
Private VLAN
Information
Configuration
Association
3-6
Table 3-2. Main Menu (Continued)
Description
Sets the input rate limit for each trunk
Sets the output rate limit for each port
Lists Ethernet and RMON port statistics
Displays entries for interface, address or VLAN
Displays or edits static entries in the Address Table
Sets timeout for dynamically learned entries
Displays STA values used for the bridge
Configures global bridge settings for STA and RSTP
Displays individual port settings for STA
Displays individual trunk settings for STA
Configures individual port settings for STA
Configures individual trunk settings for STA
Enables GVRP VLAN registration protocol
Displays information on the VLAN type supported by this switch
Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
Used to create or remove VLAN groups
Modifies the settings for an existing VLAN
untagged or forbidden
Specifies default PVID and VLAN attributes
Specifies default trunk VID and VLAN attributes
Displays Private VLAN feature information
This page is used to create/remove primary or community
VLANs
Each community VLAN must be associated with a primary VLAN
Page
3-81
3-81
3-81
3-82
3-86
3-86
3-87
3-89
3-89
3-90
3-93
3-96
3-96
3-99
3-99
3-101
3-104
3-104
3-105
3-107
3-108
3-110
3-111
3-111
3-113
3-114
3-115
3-116