Table of Contents
Advertisement
3
Configuring the Switch
Web – Click VLAN, Private VLAN, Port Information or Trunk Information.
Figure 3-70. Displaying Private VLAN Port Information
CLI – This example shows the switch configured with primary VLAN 5 and
community VLAN 6. Port 3 has been configured as a promiscuous port and mapped
to VLAN 5, while ports 4 and 5 have been configured as host ports and associated
with VLAN 6. This means that traffic for port 4 and 5 can only pass through port 3.
Console#show vlan private-vlan
Primary
Secondary
--------
-----------
5
5
Console#
Configuring Private VLAN Interfaces
Use the Private VLAN Port Configuration and Private VLAN Trunk Configuration
menus to set the private VLAN interface type, and associate the interfaces with a
private VLAN.
Command Attributes
• Port/Trunk – The switch interface.
• PVLAN Port Type – Sets the private VLAN port types.
- Normal – The port is not configured into a private VLAN.
- Host – The port is a community port and can only communicate with other ports
in its own community VLAN, and with the designated promiscuous port(s).
- Promiscuous – A promiscuous port can communicate with all interfaces within
a private VLAN.
• Primary VLAN – Conveys traffic between promiscuous ports, and between
promiscuous ports and community ports within the associated secondary VLANs.
If PVLAN type is "Promiscuous," then specify the associated primary VLAN.
For "Host" type, the Primary VLAN displayed is the one to which the selected
secondary VLAN has been associated.
3-118
Type
----------
primary
6
community
Interfaces
------------------------------
Eth1/ 3
Eth1/ 4 Eth1/ 5
4-158
Advertisement
Table of Contents
