Show Interfaces Counters - SMC Networks 100BASE-TX Management Manual

4
Command Line Interface
Example
Console#show interfaces status ethernet 1/4
Information of Eth 1/4
Basic information:
Port type:
Mac address:
Configuration:
Name:
Port admin:
Speed-duplex:
Capabilities:
Broadcast storm:
Broadcast storm limit:
Flow control:
LACP:
Port security:
Max MAC count:
Port security action:
Current status:
Link status:
Operation speed-duplex: 100full
Flow control type:
Console#show interfaces status vlan 1
Information of VLAN 1
MAC address:
Console#

show interfaces counters

This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Showing Port
Statistics" on page 3-82.
4-112
100TX
12-34-12-34-12-38
Up
Auto
10half, 10full, 100half, 100full
Enabled
32000 octets/second
Disabled
Disabled
Disabled
0
None
Down
None
12-34-12-34-12-34