Whichboot; Table 4-25. File Directory Information - SMC Networks 100BASE-TX Management Manual

Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the system displays all
files.
• A colon (:) is required after the specified unit number.
• File information is shown below:
Column Heading
file name
file type
startup
size
Example
The following example shows how to display all file information:
Console#dir
file name
------------------------------
D2.2.1.3
V2.2.1.9
Factory_Default_Config.cfg
-------------------------------------------------------------------------
Console#

whichboot

This command displays which files were booted when the system powered up.
Syntax
whichboot [unit]
unit - Specifies the unit number.
Default Setting
None
Command Mode
Privileged Exec

Table 4-25. File Directory Information

Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The length of the file in bytes.
file type
-------------- ------- ---------
Boot-Rom image
Operation Code
Config File
Total free space: 5373952
Flash/File Commands
startup size (byte)
Y 169740
Y 1635684
Y 5013
4
4-65