Private-Vlan - SMC Networks 100BASE-TX Management Manual

private-vlan

Use this command to create a primary, isolated or community private VLAN. Use the
no form to remove the specified private VLAN.
Syntax
private-vlan vlan-id {community | primary | isolated}
no private-vlan vlan-id
• vlan-id - ID of private VLAN. (Range: 1-4094, no leading zeroes).
• community - A VLAN in which traffic is restricted to port members.
• primary - A VLAN which can contain one or more community VLANs, and
serves to channel traffic between community VLANs and other locations.
• isolated – Specifies an isolated VLAN. Ports assigned to an isolated VLAN
can only communicate with promiscuous ports within their own VLAN.
Default Setting
None
Command Mode
VLAN Configuration
Command Usage
• Private VLANs are used to restrict traffic to ports within the same VLAN
"community," and channel traffic passing outside the community through
promiscuous ports that have been mapped to the associated "primary" VLAN.
• Port membership for private VLANs is static. Once a port has been assigned
to a private VLAN, it cannot be dynamically moved to another VLAN via GVRP.
• Private VLAN ports cannot be set to trunked mode. (See "switchport mode" on
page 4-148.)
Example
Console(config)#vlan database
Console(config-vlan)#private-vlan 2 primary
Console(config-vlan)#private-vlan 3 community
Console(config)#
4
VLAN Commands
4-155