Web – Click Spanning Tree, STA, Configuration. Modify the required attributes, and
click Apply.
CLI – This example enables Spanning Tree Protocol, sets the mode to RSTP, and
then configures the STA and RSTP parameters.
Console(config)#spanning-tree
Console(config)#spanning-tree mode rst
Console(config)#spanning-tree priority 45056
Console(config)#spanning-tree hello-time 5
Console(config)#spanning-tree max-age 38
Console(config)#spanning-tree forward-time 20
Console(config)#spanning-tree pathcost method long
Console(config)#spanning-tree transmission-limit 4
Console(config)#
Figure 3-56. Configuring Spanning Tree
Spanning Tree Algorithm Configuration
3
4-133
4-134
4-137
4-135
4-136
4-135
4-137
4-138
3-95