Interface Connector - Thermo Scientific SHKE8000 Series Maintenance Manual

Section 1
Installation
Test Tube Racks & Adj.
Angle Rack Holder
RS-232 Interface
Connector
1-10 Model SHKE8000 Series Shakers
Table 1-2. Available Test Tube Racks and Holders from Manufacturer
Part Number Description
950040 Test Tube Rack, 10-13 mm size
950060 Test Tube Rack, 16-20 mm size
600074 Test Tube Rack, 21-25 mm size
600075 Test Tube Rack, 26-30 mm size
600076 Adjustable-Angle Test Tube Holder with Rack, 10-13 mm
600077 Adjustable-Angle Test Tube Holder with Rack, 16-20 mm
600078 Adjustable-Angle Test Tube Holder with Rack, 21-25 mm
600079 Adjustable-Angle Test Tube Holder with Rack, 26-30 mm
600088 Universal Adjustable-Angle Test Tube Holder, 10-25 mm
600089 2 Tier Micro-Plate Rack
600090 3 Tier Micro-Plate Rack
#10-24 pan head Phillips screws for mounting test tube holders to Orbital
194024
Shaker platforms
Pan head Phillips screws, washers and nuts for mounting test tube holders
185062
to Model 2568 and 2569 Shaker Baths
Model SHKE8000/SHKE8000-ICE and SHKE8000-7/SHKE8000-8CE
Orbital Shakers are equipped with an RS-232 Serial Communication
Interface for the remote transmission of data. An RJ-11 telephone style
connector is located on the lower front left corner of the cabinet, behind
the kick panel (Figure 1-19). A cable with RJ-11 plugs and an RJ-11 to
DB-25 adapter are required.
Figure 1-19. Location of RS-232 and Remote Alarm Connectors
Thermo Scientific