Circuit Boards; Temperature Sensors - Thermo Scientific SHKE8000 Series Maintenance Manual

Fuses (continued)

Circuit Boards

Temperature Sensors

Thermo Scientific
Table 4-2. Fuses
Models SHKE8000 and SHKE8000-7
Rating Application
0.25 amp Main Power Relay Board
1.6 amp Drive Motor
Models SHKE8000-ICE and SHKE8000-8CE
0.15 amp Main Power Relay Board
0.8 amp Drive Motor
Caution Do not substitute! Replace these fuses only with fuses of identical
electrical ratings.
s
Five circuit boards control the Stackable Shaker. Four boards are located in
the relay tray compartment, the fifth is behind the liquid crystal display.
Refer to the relay tray illustrations on the following pages.
Two temperature sensors are located on the air intake grille on the right
side of the chamber (Figure 4-8). To access these sensors, remove the
protective cover, then disconnect the sensors from their respective clips.
Figure 4-8. Temp Sensor Location
Part Number
230144
230145
230142
230141
Model SHKE8000 Series Shakers
Section 4
Service
4-5