Section 2
Operation
Software Version
Software Version is for factory use only and will be important if
troubleshooting the microprocessor programming is ever necessary.
To access this screen, press the down arrow, the up arrow, the Silence
button, then the down arrow button four more times.
The screen at right will appear on
the display:
Press the Time button beneath
SwVers and the next screen will
appear; in this instance, showing the
Model SHKE8000-7 software version in
the control system memory.
To return to the previous screen, press the Time button. To return to the
Operating Screen, wait about fifteen seconds.
Temperature Sensor
Temperature Sensor Readings is for factory use only and will be important
if troubleshooting the microprocessor programming is ever necessary.
Readings
Overtemp Sensor
To access this screen, press the
down arrow, the up arrow, the
Silence button, then the down
arrow button four more times. The
screen at right will appear on the
display.
Press the Speed button beneath O-temp and this screen will appear,
showing the temperatures being
measured or read by the
Overtemperature sensor.
To return to the previous screen, press the Time, Speed, or Temperature
button. To return to the Operating Screen, wait about fifteen seconds.
Thermo Scientific
Model SHKE8000 Series Shakers
2-19