Location
Thermo Scientific
Installation
Section 1
Model SHKE8000/SHKE8000-ICE and SHKE8000-7/SHKE8000-8CE
Stackable Shakers are shipped with the following materials:
1 - T-handle 5/32" hex socket wrench
2 - Platform alignment studs 1/4-20
1 - Removeable shaker platform
6 - Grade 8, 5/32" hex socket flat head screws (with platform)
1 - 3/4" open end wrench
1 - Screwdriver for flask clip installation and removal
Locate the shaker on a firm, level surface in an area free of dust and dirt.
To allow for service access, the back of the shaker must be at least 4 inches
from the wall. Note location of the power and light switches (Figure 1-1).
Figure 1-1. Model SHKE8000 Series Incubated Stackable Orbital Shaker
Actual
START
Setpoints
(arrow
keys)
STOP
Silence
Time
Speed
Temp °C
Light
Switch
Model SHKE8000 Series Shakers
rbital Shaker
Power
Switch
1-1