Steps To Run Mail In Dynamic Weighing Modes - Neopost IS-6000 User Manual

Steps to Run Mail in Dynamic Weighing Modes

In Weigh all mode (
From the home screen:
1. Place your stack of mail in the hopper.
For more details, see
2.
Press to start processing the stack.
The system will now feed (seal), weigh, rate, stamp and stack the mail.
In Weigh First Piece Mode (
1. Place your stack of same size/weight mail in the hopper.
For more details, see
2.
Press to start.
The system weighs the first mail piece and asks you to confirm the postage amount
before applying it to all the mail pieces.
3. Press [OK] to confirm.
The system will now feed (seal), stamp and stack the mail without weighing the
remainder of the batch.
)
Using the Feeder
At any time, to stop the motors and printing, press
machine will process mail piece(s) already in system and then stop.
)
Using the Feeder
on page 107 .
on page 107.
3
. The
59