Neopost IS-6000 User Manual page 125

2. Select > Credit.
3.
If the system asks for a PIN code, enter the code using the keyboard and press [OK].
The Add credit screen is displayed.
By default, the system displays the value of the previous crediting amount.
4.
Enter the amount to add using the keyboard (use [Backspace] to clear digits).
5. Press [OK] to start the connection to the postal server.
If the crediting process is successful, the system displays a message.
If crediting fails, the system displays a failure message together with the value you
are allowed to add, depending on your postal account balance.
The amount must be in the range of Minimum reset amount and
Maximum reset amount.
In the case of a communication error, the amount previously entered
cannot be changed.
4
119