How To Turn The System On/Off - Neopost IS-6000 User Manual

How to Turn the System ON/OFF

1. Press either side of the switch to turn the Mailing System ON or OFF.
- The dash (or I) indicates the ON side.
- The circle (or O) indicates the OFF side.
System Sleep Mode
Your Mailing System is Energy Star® qualified and automatically goes into a low-power
'Sleep' mode after a period of inactivity.
A very low-power 'Sleep' mode, called 'Soft-off' is also available.
• The Mailing System will automatically switch to 'Sleep' mode after 30 minutes of
non-activity. The Supervisor can change this 30-minute default setting.
• The Mailing System can be set to 'Sleep' mode manually by a short press on the
Sleep/Wake button.
• The Mailing System can be set to 'Soft-off' mode manually by a long press on the
Sleep/Wake button.
- Amber (continuous) : the Mailing System is in Sleep mode (low power mode).
- Amber (blinking) : the Mailing System is in Soft-off mode (very low power mode).
- Green : the Mailing System is in Wake up mode and ready for use.
Sleep/wake
After switching the system OFF, there may be a delay of up to 20
seconds to park the print head and free the remaining voltage.
The Sleep/Wake key is located at the top right
corner of the control panel.
Wakes the Mailing System up or turns it to 'Sleep'
or 'Soft-off' mode.
SLEEP / WAKE KEY
2
31