Removing The Bottom Tron-Lighting Cable; Prerequisites; Procedure - Alienware Area-51 R3 Threadripper Edition Service Manual

Removing the bottom tron-
lighting cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the left and right side-panels. See
3 Remove the
4 Remove the
5 Remove the
6 Remove the
7 Remove the
8 Remove the

Procedure

1 Disconnect the bottom tron-lighting cables from the logo board.
2 Open the securing clip which secures the bottom tron-lighting cables to the
chassis.
170
stability foot.
full-length graphics
PCI fan.
handle bars.
front bezel.
rear bezel.
base panel.
computer. After working inside your
After working inside your
"Removing the side
cards.
panels".