Removing The Bottom Cover; Prerequisites; Procedure - Alienware Aurora R6 Service Manual

Removing the bottom cover

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the left-side cover.
2. Remove the two 2.5-inch

Procedure

1. Press the securing tabs to release the bottom cover from the slots on the chassis.
a. securing tabs (8)
b. slots (8)
2. Tilt the computer towards the front until the base is facing up.
3. Lift the bottom cover from the chassis.
computer. After working inside your computer, follow the instructions in
hard-drive cages.
After working
www.dell.com/
27