Pip Add Window - Barco iCon H250 User Manual

3. Advanced commands
3.1.8

PiP add window

Description
Adds a PiP window .
To add a window following have to be specified:
• source to be visualized in the window
• size and position of the window
Command
Command [0]
Command [1]
Data
strSource = C-String describing the layer and the source to be selected i.e. for example L1 RGB, L1 RGB (YUV), PC, L1 YUV
(RGB), DVI, L2 Video, L2 S-Video, HDSDI, SDI.
The source types are the names as displayed in the OSD source selection menu.
See the Source selection command for more details
For more info about the input configurations, see the projector's Owner's manual.
dwXsize = signed double word Xsize : describes the "width" of the window (x axis).
dwYsize = signed double word Ysize : describes the "height" of the window (y axis).
dwXPos = signed double word XPosition : describes the start position of the window (x axis).
dwYPos = signed double word YPosition : describes the start position of the window (y axis).
The acknowledge data (returned data) contains also an error code and its Unicode description (this is the
same error as the one displayed on the desktop).
Xsize, Ysize are given in "pixels"
106 R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250/400 16/02/2007
\x12
\x0c