Cleaning The Scan Area - Contex HD Ultra X 6000 Series User Manual

Maintenance

Cleaning the scan area

Follow the steps below for thoroughly cleaning the scanner and scan area.
Be sure to clean the scan area when results are not optimal. Even small dust
particles in the scan area can cause streaks in your scanned image.
You must clean the following scanner parts/areas:

Scanner feed area

Scanner glass

White background

Upper and lower rollers
Caution: Do not use abrasives, acetone, benzene or any fluids that
contain these chemicals. Do not spray liquids directly onto the scanner glass
or anywhere else in the scanner.
Cleaning the scan area
23
Turn the scanner power off and disconnect the plug

Press the main power switch (on rear of scanner) to OFF

Disconnect the power plug
Caution: Always turn the scanner power off and disconnect the power
plug before cleaning the scanner.
40