Table of Contents
Advertisement
Maintenance
7.3 Cleaning the Scan Area
A clean scan area is vital for optimal results. Cleaning instructions for each scanner type follow
below:
Caution: do not use abrasives, acetone, benzene or fluids that contain these chemicals.
Do not spray liquids directly onto the scanner glass-plate or anywhere else in the scanner.
Caution: Before cleaning the scan ar
disconnect the power plug.
C
leaning the Scan Area
On scanners:
1.
Turn the scanner power off and disconnect the power plug.
2.
Open the scan area lid.
3
.
The glass-plate is now exposed for cleaning.
4.
Clean the glass with a lint-free cloth and a mild, streak-free, glass cleaner. Dry the
glass completely using a separate clean, dry lint-free cloth like the one provided with the
maintenance kit.
5.
Close the scanning area lid when finished. Cover your scanner with the plastic dust
cover when not in use.
Caution: Make sure the scanner power is OFF when using the scanner dust cover.
ea, be sure to turn the scanner power off and
7-2
Advertisement
Table of Contents
