Monitoring With Widesystem - Contex HD Ultra X 6000 Series User Manual

Loading

Monitoring with WIDEsystem

WIDEsystem software monitors the scanner and reports on its functionality.
Double left click the WIDEsystem icon
WIDEsystem control interface.
WIDEsystem program control interface
in the system tray to open the
A greyed WIDEsystem icon indicates the scanner is off or in sleep mode. A
yellow icon shows it is connected. Mouse-over the icon for a quick
statement of the current scanner status.
Double-click the WIDEsystem icon to view more detailed scanner
information. For example:

Activate and upgrade your scanner. Open the License tab. You will
need to have a valid license for the activation/upgrade

View Error messages and logs. Runtime errors are reported
immediately on your screen. Open the Status and Info tab to view error
messages and logs

View information about scanner device firmware and hardware
revisions by opening the Info tab.

Install new firmware – Download new firmware to a folder on your
machine then right click on the scanner icon, select Advanced Options
> Update Scanner Firmware to install it on your scanner.

Initiate a system hardware scan to refresh the interface. Right click
the scanner icon, select Advanced Options > Rescan Hardware Bus.

Set up your scanner so it can be shared by other PCs on the
network. Open the Scan to Net tab to make settings. See also
Installation - Share the scanner on the LAN.

Set up Nextimage so it can access shared scanners on the
network. Open the Scan to Net tab to make settings.

Launch the WIDEsystem on-line help. To find instructions on trouble
shooting and using WIDEsystem with your scanner. Open
WIDEsystem and press the F1 key.

Launch the scanner calibration wizard. Right click on the scanner
icon, select Calibrate.
Launch the WIDEsystem on-line help. To find instructions on trouble
shooting and using WIDEsystem with your scanner. Open WIDEsystem
and press the F1 key
34