Automatic Sleep - Contex HD Ultra X 6000 Series User Manual

Switching ON and OFF

Automatic Sleep

By default, this is set for 15 minutes.
NOTE: You will be prompted to change the idle time during installation.
To set sleep mode options:
1. Open WIDEsystem by double-clicking the WIDEsystem icon
2. Check the Enter Sleep mode automatically option.
3. Enter the Idle time in minutes (minutes of scanner inactivity before entering the sleep mode)
4. Press Apply
Sleep Mode options in the WIDEsystem program – Timer tab
NOTE: Automatic Sleep can be over-ridden:

Wake the scanner from sleep by using the power button or inserting paper

Forced the scanner to sleep by holding the power button for 3 seconds
and select the Timer tab.
27