Turning Power On/Off; Main Power Switch; Scanner Self-Test; Scanner Ready To Scan - Contex HD Ultra X 6000 Series User Manual

Switching ON and OFF

Turning Power ON/OFF

Main power switch

The main power switch is at the back of the scanner on the right side.
Press the top side of the switch (marked "I") to turn the main power ON.
Press the lower side (marked "0") to turn OFF the power.
Main power switch is at the back of the scanner. Press "I" for ON and "0" for OFF.

Scanner Self-Test

When the scanner power is turned ON it runs a short self-test.
As part of this test, all of the LED lights on the keypad will light
up.
All LEDs are lit during self-test

Scanner ready to scan

The scanner is ready for scanning when the power LED turns
green. The scanner starts up in Wake mode (see next
section).
You can leave the main power switch permanently ON and
control scanner power through its Sleep and Wake modes.
Panel when scanner is ready – in wake mode
25