Switching ON and OFF
Wake and Sleep modes
With the main power switch ON, scanner power can be forced into Sleep mode
and taken back out into Wake mode. Sleep mode is an energy saving mode
where the scanner cannot be operated. Wake mode is the same as if the
scanner had just been switched on for normal scanner operation.
Power button turns RED in sleep mode
The scanner will go into Sleep mode:
Automatically after a set idle time (see Automatic Shutdown).
Manually by holding down the power button down for 3 seconds.
The scanner will go into Wake mode:
When a document is fed into the scanner.
When any button is pressed on the keypad.
Advantages of Sleep mode:
Ready faster: Skip the self-test and begin scanning in seconds.
Convenience: Loading paper will start the scanner.
Save energy: Save energy without compromising accessibility.
26