Software - Contex HD Ultra X 6000 Series User Manual

Installation

Software

3
Install WIDEsystem and scan/copy software on your PC
IMPORTANT: WIDEsystem contains the scanner drivers and must be installed BEFORE
THE SCANNER IS CONNECTED or any scanner software to be used with the scanner

Insert the WIDEsystem USB thumb drive (memory stick) into the PC. The setup program will
usually start automatically but if it does not locate the setup.exe file on the thumb drive and start
it manually by double-clicking it

Follow the instructions on your screen to install the WIDEsystem software and scanner drivers.
Reboot the PC if asked to do so to complete the installation

When successfully installed the WIDEsystem icon will show in the pc system tray.

Remove the USB thumb drive
Now install Contex Nextimage or scan and copy software from a third-party supplier
: During all installation steps be sure to select 'YES' if Windows asks you to allow
IMPORTANT
the software to access the network.
CAUTION: DO NOT CONNECT THE SCANNER TO POWER OR TO THE PC YET.
This is to ensure your own personal safety and to help protect your device from potential
damage during the cleaning and checking stages that follow.
After installing all software, please leave the PC switched ON while performing the next steps to
prepare the scanner.
11