Removing Scanner Glass - Contex HD Ultra X 6000 Series User Manual

Maintenance

Removing scanner glass

Replacing the scanner glass
41
Remove scanner glass

Place an index finger under each end
of the glass then starting at one end
apply moderate upwards pressure to
begin separating it from the scanner
body

Lift each end of the glass no more
than 10mm / 0.5".
SEE NEXT PAGE FOR FULL
INSTRUCTIONS.
WARNING: DO NOT LIFT THE
GLASS FULLY OUT OF THE
SCANNER AT THIS POINT.
FAILURE TO OBSERVE THE
CORRECT SCANNER GLASS
REMOVAL METHOD MAY BREAK
THE GLASS.
WARNING
51