Contex HD Ultra X 6000 Series User Manual page 57

Maintenance
Replacing the white background
48
Remove the white background

Use a flat-bladed screwdriver tip wrapped in a soft
cloth or similar and gently push it into the gap
between the metal and the white background at one
end

With a gentle levering action, compress the side
edge of the plastic background to release it over the
lower edge. Work the tool along the edge towards the
opposite end until it is completely released

Remove the white background free by lifting it up and
rotating it.
NOTE: Do not use excessive force on the background
or pull it from the lid before enough has been released using
the tool.
Remove by levering at A to release lower
edge then rotating whole part about B
White background
(colored red for identification)
B
A
56