Turning The Scanner On And Off; Main Power Switch; Sleep And Wake Modes - Contex SD One 36 User Manual

Turning the Scanner ON/OFF

Turning the Scanner ON and OFF

Main power switch

The main power switch is at the back of the scanner.
• Press the top side of the switch (marked "I") to turn the main power to
ON.
• Press the bottom side of the switch (marked "0") to turn the main
power to OFF.
.

Sleep and wake modes

With the main power switch ON, scanner power will go into Sleep mode and
Wake mode. Sleep mode is the energy saving mode. The scanner cannot
scan when in the Sleep mode. Wake mode is the full power ON mode for
scanner operation.
The scanner will go from Wake mode into Sleep mode:
• Automatically: after a set idle time (see
The scanner will go into Wake mode from Sleep mode:
• When you feed a document into the scanner.
21
Sleep mode options below).